S/W ELBOW & TEE

Product Details:

Stainless Steel Socket Weld Elbow – Detailwise Description 1. General

• Equipment Name: Stainless Steel Socket Weld Elbow

• Purpose / Function:

  • Used to change the direction of piping in high-pressure and high-temperature systems.

  • Provides leak-proof, mechanically strong joints without threading.

  • Commonly used in steam, chemical, and instrumentation piping systems.

2. Material of Construction

• Body: Stainless Steel SS 304 / SS 316 / SS 316L

• Socket: Precisely machined to fit pipe insertion

• Weld Type: Fillet weld after pipe insertion

• Corrosion Resistance: Excellent resistance to steam, water, and mild chemicals

3. Design Features

• Angle: Available in 45° and 90° bends

• Smooth internal surface for minimal turbulence

• Suitable for high-pressure and vibration-prone piping systems

• Compact and durable design

• Complies with ASME / ASTM standards for socket weld fittings

4. Technical Specifications 5. Applications

• Steam lines and condensate lines

• Oil & gas, petrochemical, and chemical plants

• Power plants and refineries

• Instrumentation and utility piping

• Corrosive and high-temperature fluid systems

Product Details:

^{KALPATARU  compression tube fittings are double ferrule-type fittings  which provide 
leak-proof, torque-free seals at the tubing connection.
They provide  safety and  eliminate hazardous leaks of fluids in the 
instrumentation field for a process, pressure, hydraulic, and other applicable tubing systems
 
Types
Tube to Union, Tube to  Male, Tube to Female, Instrument Pipe Fittings, Accessories
TYP YOF FITTINGS
ELBOW, TEE, UNION, MALE CONNECTOR, FEMALE CONNECTOR
Equivalent To
SWAGELOK, PARKER, DK-LOK, HOKE, KALPATARU
Grade
SS304, SS316, DUPLEX,SUPER DUPLEX,MONEL
Sizes
1/8’’ to 2’’ and 3mm to 50mm
Ends
Threaded, Welding, JIC,
Pressure Rating
1000 Psi, 3000 Psi, 6000 Psi, and 10000 Psi
Threads
NPT, BSPT, and BSP
HS CODE
73072900
APPLICATIONS
OIL,GAS,PETROCHEMICALS INDUSTRIES,REFINERYS,HYDROLICLINE}

Product Details:

 Component Name

Stainless Steel Cross Tee – Female NPT

🧱 Material Specifications

• Material Grades (common):

  • SS 304 / ASTM A182 F304

  • SS 316 / ASTM A182 F316

  • SS 316L (low carbon, for better corrosion resistance)

• Manufacturing: Forged or investment cast

• Finish: Natural / pickled / passivated

🔩 Connection Type

• Thread Standard:
  NPT – National Pipe Thread (Tapered)
  As per ASME / ANSI B1.20.1

• Thread Type:
  Female (internal) on all four ports

• Thread Taper:
  1 in 16 (¾ inch per foot)

➕ Configuration

• Type: 4-Way Cross (Equal Cross)

• Ports:
  4 × Female threaded outlets at 90°

• Port Size:

  • Equal sizes (e.g., ½" × ½" × ½" × ½")

  • Reducing crosses available on request

📏 Size Range (Typical)

• Nominal Pipe Sizes (NPS):

  • 1/8", 1/4", 3/8", 1/2"

  • 3/4", 1", 1½", 2" (and higher by manufacturer)

📐 Dimensional Standard

• Dimensions generally comply with:

  • ASME B16.11 (for forged threaded fittings)

• Key dimensions:

  • Center-to-end length

  • Overall width

  • Thread engagement length
    (Exact dimensions vary by size and manufacturer)

💪 Pressure Rating

(Depends on size and class)

• Class 2000

• Class 3000

• Class 6000

Pressure ratings are per ASME B16.11 and reduce with increasing temperature.

🌡️ Temperature Range (Approx.)

• SS 304: up to ~425 °C

• SS 316 / 316L: up to ~450 °C
  (Subject to pressure-temperature charts)

🧪 Media Compatibility

Suitable for:

• Water & steam

• Air & gas

• Oil & fuel

• Hydraulic fluids

• Many chemicals (especially with SS316)

🛠️ Installation Notes

• Use PTFE tape or thread sealant suitable for NPT threads

• For SS-to-SS connections:

  • Use anti-seize compound to prevent thread galling

• Do not over-tighten (NPT seals by taper interference)

🏭 Typical Applications

• Instrumentation piping

• Process lines

• Chemical & petrochemical plants

• Hydraulic & pneumatic systems

• Food & pharma (mainly SS316/316L)

📌 Standard Description (Example)

Cross Tee, 1/2" NPT(F) × 1/2" NPT(F) × 1/2" NPT(F) × 1/2" NPT(F), ASTM A182 F316, ASME B16.11, Class 3000

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Stainless Steel Socket Weld Union

A Stainless Steel Socket Weld Union is a high-pressure pipe fitting used to connect two pieces of pipe or fittings permanently via socket welding, while also allowing for future disassembly without cutting the piping. It is ideal for applications where strong, leak-proof joints are needed, but periodic maintenance or replacement is also required.

✅ Key Specifications:

• Material:

  • Stainless Steel 316 or 304

  • SS 316 is preferred for corrosive environments (chemical, offshore, etc.)

• Connection Type:

  • Socket Weld (SW) on both ends

  • Allows insertion of pipe into recessed socket, followed by fillet welding

  • Central union nut allows for easy disconnection without disturbing the welds

• Size Range:

  • Typically from 1/8" to 2" nominal pipe size (NPS)

• Pressure Ratings:

  • Common classes:

    • Class 3000 (SCH 80)

    • Class 6000 (SCH 160 or XXS)

    • Class 9000 for special applications

• Standards:

  • ASME B16.11 – Forged Steel Socket-Weld and Threaded Fittings

  • ASTM A182 F316 / F304 – For forged SS fittings

📌 Components:

1. Male End – Socket weld

2. Female End – Socket weld

3. Union Nut – Threaded ring holds the union together and allows disassembly

⚙️ Advantages:

• Disassemblable joint without cutting the pipe

• Strong, pressure-tight connection due to welding

• Ideal for high-pressure, high-temperature, or corrosive service

• Resistant to vibration, shock, and thermal cycling

💡 Common Applications:

• Oil & gas piping systems

• Petrochemical and chemical process lines

• Steam and high-pressure water systems

• Power plants and boiler piping

• Instrumentation lines requiring maintenance access

Product Details:

A KALPATARU PIPE & FITTINGS FORGE FITTINGS

 

 

Product Details:

We are among the distinguished names in the industry for manufacturing and supplying Forged Pipe Fittings. The offered products are used for joining pipe of different dimensions in water treatment plants and oil & petroleum industries. They are high in tensile strength and have a low weight. Being made from high grade raw material, these are resistant to corrosion and have a longer service life.

Specifications:

Sizes available: 1/8" through to 4"

Pressure: 3000lb through to 9000lb

 
Material Grades:

Stainless Steel: A182 F304/L, F310, F316/L, F321/H, F347/H, F410, F440, 904L

Carbon Steel: A105

Low Temperature Steel: A350, LF2, LF3, LF6

Alloy Steel: A182 F1, F5, F9, F11, F12, F22, F91

High Yield: A694 F42, F52, F60, F65, F70

Duplex & Super Duplex: A182 F51, F44, UNS S32760

Nickel Alloys: 200, 400, K500, 600, 625, 800, 825

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2

Aluminum: 5083, 5154, 5251, 6061, 6063, 6082

Standard: 

ASME/ANSI B16.5, ASME/ANSI B16.36, ASME/ANSI B16. 47 SERIES A (MSS SP-44), SERIES B (API 605), BS4504, EN1092-01, AWWA C207, UNI 2276-67, DIN, JIS, BS 10:1962, IS:6392-1971, API 6A etc.

Class: 

ASA (150#, 300#, 400#, 600#, 900#, 1500#, 2500#), BS 4504/EN 1092-01- (PN2.5, PN6, PN10, PN16, PN25, PN40, PN63/64, PN100, PN160, PN250, PN320, PN400), (JIS B2220, B2210), (UNI 2276-67, 2278-67, 2278-67), (IS TABLE 5, 11, 17), BS 10 (TABLE D,E,F,H,J,K,R), DIN (2576, 2527, 2641, 2642, 2638, 2628, 2629, 2630, 2631, 2632, 2633, 2634, 2635, 2627, 28115) AWWA (C207 Class B, D, E ), API 6A (2000PSI, 3000PSI, 5000PSI, 10000PSI), SAE Flanges 3000PSI, 6000PSI etc.

Product Details:

A KALPATARU PIPE & FITTINGS FORGE FITTINGS